Commissioning the system
1.2 User administration
PCU-Basesoftware (IM8)
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
17
Figure 1-5 "HMI" tab
Table 1- 3 The default is marked in "
".
Key filtering is activated.
"no" Key filtering not activated.
Select the file with filter settings
The HMI program is started.
The HMI program is not started.
File:
F:\hmisl\siemens\sinumerik\
hmi\autostart\run_hmi.exe
Select the HMI program
HMI program: Hide start task bar
HMI program: Show start task bar
Task bar on top:
HMI program: Start task bar in the
HMI program: Start task bar always visible
To Next Page
Loading...
Need help?
General
