MD51203 $MNS_ACCESS_WRITE_TM_SC Access level, write TM additive offsets.
MD51204 $MNS_ACCESS_WRITE_TM_EC Access level, write TM operating off‐
sets.
MD51205 $MNS_ACCESS_WRITE_TM_SUPVIS Access level, write TM monitoring data.
MD51206 $MNS_ACCESS_WRITE_TM_ASSDNO Access level, write TM unique D num‐
ber.
MD51207 $MNS_ACCESS_WRITE_TM_WGROUP Access level, write TM wear groups
(magazine location / magazine).
MD51208 $MNS_ACCESS_WRITE_TM_ADAPT Access level, write TM tool adapter ge‐
ometry data.
MD51209 $MNS_ACCESS_WRITE_TM_NAME Access level, write TM tool name and
duplo.
MD51210 $MNS_ACCESS_WRITE_TM_TYPE Access level, write TM tool type.
The access level of individual parameters can be overlaid through settings in the
<PARAMETERCONFIGURATION> tag, "Access level" entry (see SectionConfiguring list
parameters (Page 191)).
Access levels for window "Internal Data"
MD51198 $MNS_ACCESS_READ_TM_ALL_PARAM Protection level TOOLMAN details -
Read internal data.
Depending on the machine data, the
"Internal Data" softkey is either hidden
or displayed.
MD51215 $MNS_ACCESS_WRITE_TM_ALL_PARAM Access level TOOLMAN details - Write
internal data.
Access levels for certain functions of the tool management
MD51216 $MNS_ACCESS_TM_TOOL_CREATE Access level, TM, create tool.
MD51217 $MNS_ACCESS_TM_TOOL_DELETE Access level, TM, delete tool.
MD51218 $MNS_ACCESS_TM_TOOL_LOAD Access level, TM, load tool.
MD51219 $MNS_ACCESS_TM_TOOL_UNLOAD Access level, TM, unload tool.
MD51220 $MNS_ACCESS_TM_TOOL_MOVE Access level, TM, move tool.
MD51221 $MNS_ACCESS_TM_TOOL_REACTIVATE Access level, TM, reactivate tool.
MD51222 $MNS_ACCESS_TM_TOOL_MEASURE Access level, TM, measure tool.
MD51223 $MNS_ACCESS_TM_TOOLEDGE_CREATE Access level, TM, create tool cutting
edge.
MD51224 $MNS_ACCESS_TM_TOOLEDGE_DELETE Access level, TM, delete tool cutting
edge.
MD51225 $MNS_ACCESS_TM_MAGAZINE_POS Access level, TM, position magazine.
Tool management
12.1 Machine data for tool management
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1 165
To Next Page
Loading...
Need help?
General
