Templates
You have the capability of importing files with any name. The content of the files is evaluated.
The new file name is derived from the contained information.
File Information
ma_types.xml Machine types
dealer.xml Dealer's data
oem.xml Manufacturer's data
oemsubs.xml Manufacturer's data of a regional office
user.xml End customer data
Procedure
1. Select the "Diagnostics" operating area.
2. Press the "Version" softkey.
It takes some time to call the version display. The progress of the data
determination is displayed in the dialog line.
3 Press the "Logbook" and "Change" softkeys.
4. Press the "Import data" softkey.
5. Select the appropriate drive and the required file.
6. Press the "OK" softkey.
The file is automatically copied to the correct location in the system.
If the template only contains one data set, the data is transferred directly
to the entry fields and saved.
7. If the entry fields already contain data, use the "Yes" softkey to confirm
overwriting of this information.
8. If the template contains several data sets, select one data set from the
list.
The relevant data is transferred to the entry fields.
9. Press the "OK" softkey.
The selection or the manual change is confirmed and saved.
See also
Create a template (Page 429)
Service and diagnostics
18.5 Machine identity
SINUMERIK Operate (IM9)
432 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
To Next Page
Loading...
Need help?
General
