SENTRON PAC3200
Manual, 02/2008, A5E01168664B-04
127
Parameterize
9
9.1 Introduction
Device settings
The "Parameterization" chapter describes the device settings. These functions include:
● Adjustment to the physical conditions of use
● Integration into the communication system
● Country-specific settings, ergonomics, device protection
It is possible to set the device by means of:
● The operator interface of the device
● Configuration software
Note
Protection of the device settings
As delivered, the device settings are not protected. At startup, a password should be
assigned and the device protection activated to guard against unauthorized or inadvertent
changes.
See also
Advanced (Page 142)
To Next Page
Loading...
