Parameterize
9.2 Parameterizing the operator interface
SENTRON PAC3200
Manual, 02/2008, A5E01168664B-04
133
9.2.4 Basic parameters
Basic parameters are all those settings concerning the measuring inputs.
Call: "SETTINGS > BASIC PARAMETERS"
Figure 9-4 "BASIC PARAMETERS" device setting
VOLTAGE INPUTS
Figure 9-5 "VOLTAGE INPUTS" device setting
CONNECTION TYPE Connection types:
3P4W: 3 phases,
4 conductors,
unbalanced load
3P3W: 3 phases,
3 conductors,
unbalanced load
3P4WB: 3 phases,
4 conductors,
balanced load
3P3WB: 3 phases,
3 conductors,
balanced load
1P2W: 1 phase,
2 conductors,
unbalanced load
Default: 3P4W
To Next Page
Loading...
