Description
3.10 Slot for expansion modules
SENTRON PAC3200
Manual, 02/2008, A5E01168664B-04
63
3.10 Slot for expansion modules
Interface
The SENTRON PAC3200 has one slot (MOD1) for installing optionally available expansion
modules. Only communication modules such as the PAC PROFIBUS DP expansion module
can be used. Please consult the current catalogs to find out which modules are available for
the SENTRON PAC3200.
The second slot (MOD2) has no function on the SENTRON PAC3200.
Figure 3-13 SENTRON PAC3200 with screw terminals, rear
(1) MOD 1, connection that can be used on SENTRON PAC3200
(2) MOD 2, cannot be used on SENTRON PAC3200
CAUTION
Avoid contamination of the contact area below the label "MOD1" since otherwise the
expansion module cannot be connected or can even be damaged. Insertion of metal pins or
wires into the contact openings can result in device failure.
You can find more detailed information on the PAC PROFIBUS DP expansion module in the
operating instructions and the manual of the PAC PROFIBUS DP expansion module.
To Next Page
Loading...
