Siemens SENTRON PAC3200 - Structure - Digital Input Status and Digital Output Status with the Function Codes 0 X03 and 0 X04; Table 3-7 Structure - Status of the Digital Inputs and Status of the Digital Outputs

Description
3.9 Ethernet port
SENTRON PAC3200
44 Manual, 02/2008, A5E01168664B-04
See also
Structure - Digital input status and digital output status with the function codes 0x03 and
0x04 (Page 44)
Structure - Device diagnostics and dev
ice status with the function codes 0x03 and 0x04
(Page 45)
Structure - Limit values with function
codes 0x03 and 0x04 (Page 45)
3.9.4 Structure - Digital input status and digital output status with the function codes
0x03 and 0x04
The following are available via MODBUS:
● "Status of the Digital Inputs"
● "Status of the Digital Outputs"
Input status and output status of the SENTRON PAC Power Monitoring Device
Table 3-7 Structure - Status of the digital inputs and status of the digital outputs
Name Length Status Byte Bit Bit mask Access
Status of the Digital Outputs 32 bits DO 3 0 0x00000001 R
Status of the Digital Inputs 32 bits DI 3 0 0x00000001 R
See also
Modbus measured variables with the function codes 0x03 and 0x04 (Page 40)