Siemens SENTRON PAC3200 - 6.3 Connecting the cables to the terminals

Connection
6.3 Connecting the cables to the terminals
SENTRON PAC3200
Manual, 02/2008, A5E01168664B-04
81
6.3 Connecting the cables to the terminals
Connecting cables to the screw terminal
Tool: PZ2 cal. screwdriver ISO 6789


Figure 6-6 Connecting cables to the screw terminal
Connecting the cables to the ring lug terminals:
Note
The SENTRON PAC3200 with ring lug terminal is only intended for:
• use in NAFTA / USA
• Regions in which open terminals are permitted.
WARNING
Improper connection may result in death, serious injury, or property damage.
Ring lug terminals are intended exclusively for connecting ring lugs. Please ensure that the
ring lugs are properly attached to the ends of the cables.