Parameterize
9.2 Parameterizing the operator interface
SENTRON PAC3200
Manual, 02/2008, A5E01168664B-04
141
9.2.8 Display
Figure 9-14 "DISPLAY" device setting
Device settings of the display
CONTRAST Contrast of the LC display.
Range: 0 to 10.
Default: 5
BACKLIGHT LEVEL Intensity of the backlighting of the LC display.
The value "0" switches the backlighting off.
Range: 0 to 3.
Default: 3
BACKLIGHT DIMMED Intensity of the backlighting of the LC display. Set by the
device after expiry of time until dimmed. See "TIME
UNTIL DIMMED"
The value "0" switches the backlighting off.
Range: 0 to 3.
Default: 1
TIME UNTIL DIMMED Time after which the device switches the backlighting
from BACKLIGHT LEVEL" to "BACKLIGHT DIMMED".
Range: 0 to 99 min.
Default: 3 min.
INVERT DISPLAY Inversion of the basic representation of the display.
ON/OFF switch:
ON / OFF.
OFF: Dark text on light background.
On: Light text on dark background.
Default:
On:
REFRESH TIME Refresh rate of the display.
Range: 330 to 3000 ms
Default: 330 ms.
The tolerance of the refresh rate is 100 ms.
To Next Page
Loading...
