Technical data
11.1 Technical data
SENTRON PAC3200
164 Manual, 02/2008, A5E01168664B-04
Mechanical dynamic stress
Environmental requirements
Low-temperature test
In accordance with
DIN EN 60068 Part 2-1:1995-03
Vibratory load
Test Fc (conditions of use)
in accordance with IEC 60068 Part 2-6:1995-03 /
EN 60068 Part 2-6:1996-05
Vibratory load
Test Fc (transport conditions)
in accordance with IEC 60068 Part 2-6:1995-03 /
EN 60068 Part 2-6:1996-05
Seismic conditioning
Test Fe/(conditions of use)
in accordance with IEC 60068 Part 3-3:1991-02/
EN 60068 Part 3-3:1993-09
Shock load
Test Ea (conditions of use)
in accordance with IEC 60068 Part 2-27:1987 /
EN 60068 Part 2-27:1995-03
Shock test, withstand strength
Test Ea/(conditions of use)
in accordance with IEC 60068 Part 2-27:1987 /
EN 60068 Part 2-27:1995-03
Continuous shock
Test Eb (transport conditions)
in accordance with IEC 60068-2-29:1987 /
EN 60068 Part 2-29:1995-03
Mechanical stability against bump
and impact/(conditions of use)
in accordance with IEC 60068-2-75:1997-08
Free fall of the unpacked device
(transport conditions)
in accordance with IEC 60068-2-32:1975
Safety regulations
The device has been tested in accordance with the following standards:
IEC / UL 61010-1:2001 (2nd Ed.) with Corr. 1
CAN / CSA C22.2 No. 61010-1, second Edition
EN 61010-1-1:2001 (2nd Ed.)
DIN EN 61010-1:2002 with Corr. 1
To Next Page
Loading...
