SENTRON PAC3200
Manual, 02/2008, A5E01168664B-04
91
Startup
7
7.1 Overview
Prerequisites
1. The device has been installed.
2. The device has been connected in accordance with the possible connection methods.
3. An optional expansion module has been installed. If the SENTRON PAC3200 is to be
operated with an expansion module, the module must be installed before the SENTRON
PAC3200 is started up.
Steps for starting up the device
1. Apply the supply voltage
2. Parameterizing the device
3. Apply the measuring voltage
4. Apply the measuring current
5. Check the displayed measured values
NOTICE
Check the connections
Incorrect connection can result in malfunctions and failure of the device.
Before starting up the SENTRON PAC3200, check that all connections are correct.
To Next Page
Loading...
