Commissioning
10.2 Commissioning the ET 200SP for PROFINET IO
Distributed I/O system
202 System Manual, 12/2016, A5E03576849-AG
For commissioning of the ET 200SP distributed I/O system as an I-device on the
PROFINET IO, we recommend the following procedure:
Table 10- 2 Procedure for commissioning the ET 200SP as an I-device on the PROFINET IO
Section Installation (Page 54)
2 Connecting ET 200SP
• Supply voltages
• PROFINET IO
• Sensors and actuators
Section Wiring (Page 75)
3 Inserting a SIMATIC memory card in the I-device Section Removing/inserting a
SIMATIC memory card on the CPU
Section Configuring (Page 140)
Switching on supply voltages for the IO controller
Documentation of the IO controller
6 Switching on supply voltages for I-device and IO
devices
CPU 15xxSP-1 PN
(http://support.automation.siemens
.com/WW/view/en/90466439/1333
00) manual and documentation of
Download configuration to the I-device
8 Switching IO controller and I-device to RUN
mode
Documentation of the IO controller
and CPU 15xxSP-1 PN
(http://support.automation.siemens
.com/WW/view/en/90466439/1333
9 Checking LEDs CPU 15xxSP-1 PN
(http://support.automation.siemens
.com/WW/view/en/90466439/1333
10 Testing inputs and outputs The following functions are helpful:
Monitoring and modifying tags,
testing with program status, forc-
ing, controlling the outputs. See
section Test functions and elimi-
nating problems (Page 259)
To Next Page
Loading...
