Siemens SIMATIC ET 200SP User Manual

Technical specifications
15.1 Technical specifications
Analog input module AI Energy Meter 480VAC/CT HF (6ES7134-6PA00-0CU0)
Manual, 07/2018, A5E42674880-AA
135
Article number
6ES7134-6PA00-0CU0
Diagnostic messages
• Line quality
Yes
• Supply voltage
Yes
• Hardware interrupt lost
Yes
• Parameter assignment error
Yes
• Module fault
Yes
• Channel not available
Yes
• Overflow/underflow
Yes
• Overload current
Yes
Diagnostics indication LED
• Monitoring of the supply voltage (PWR-
LED)
Yes
• Channel status display
Yes; Green LED
• for channel diagnostics
Yes; red Fn LED
• for module diagnostics
Yes; green/red DIAG LED
Integrated Functions
Measuring functions
• Measuring procedure for voltage meas-
urement
TRMS
• Measuring procedure for current measure-
ment
TRMS
• Type of measured value acquisition
seamless
• Curve shape of voltage
Sinusoidal or distorted
• Buffering of measured variables
Yes
• Parameter length
128 byte
• Bandwidth of measured value acquisition
3.2 kHz; Harmonics: 63 / 50 Hz, 52 / 60 Hz
Measuring range
– Frequency measurement, min.
45 Hz
– Frequency measurement, max.
65 Hz

Siemens SIMATIC ET 200SP Specifications

General

System Type	Distributed I/O System
Mounting	DIN Rail
Communication Protocol	PROFINET, PROFIBUS
IP Rating	IP20
Category	I/O Systems
Supply Voltage	24 V DC
Modularity	Yes
Hot Swapping	Yes
Storage Temperature	-40°C to +70°C
Digital Inputs	Yes
Digital Outputs	Yes
Analog Inputs	Yes
Analog Outputs	Yes
Communication Interface	PROFINET, PROFIBUS
Number of Modules	Up to 64
Relative Humidity	5 to 95% (non-condensing)
Operating Temperature	-25°C to +60°C