Siemens SIMATIC HMI series System Manual

Procedure
1. Select the "Tools > Convert project data" menu command in WinCC Explorer.
2.
Select the project data to be converted:
– Pictures and faceplates
– Global libraries
– Project libraries
– Page layouts and line layouts
– C and VB project functions and actions
– C and VB standard functions
– Data for Basic Process Control
3. Confirm with "OK".
The selected data is converted to the current version of WinCC.
WinCC projects that were created with versions prior to WinCC V7.0
Migrated WinCC projects with SQL Server 2000 databases
WinCC projects that were created with versions prior to WinCC V6.2 SP2 include database
settings of the SQL Server 2000.
To access these databases with WinCC V7.4 and higher, you must adapt the compatibility
settings.
For additional information, refer to "How to migrate SQL Server 2000 databases (Page 142)".
Note
No migration of a WinCC V6.2 SP3 project if a WinCC editor has never been opened before
If you have never opened an editor, for example, Alarm Logging or Text Library, in a WinCC
V6.2 SP3 project, you cannot migrate the project to WinCC V7.4.
See also
Important differences compared to previous versions (Page 138)
Conditions for Migration
(Page 141)
How to migrate SQL Server 2000 databases (Page 142)
Migration
5.1 Introduction
WinCC: General information and installation
System Manual, 02/2017, A5E40840020-AA 137

Siemens SIMATIC HMI series Specifications

General

Series	SIMATIC HMI
Category	Control Panel
Display Type	TFT LCD
Touch Screen	Yes (resistive or capacitive, depending on model)
Processor	Varies by model (e.g., ARM-based processors)
Storage	Varies by model (e.g., Flash memory, microSD card slot)
Communication Interfaces	Ethernet, USB
Protection Class	IP65 (front panel), depending on model
Operating Temperature	0 to 50°C, -20 to 60°C
Power Supply	24 V DC
Memory	128 MB, 256 MB