Installing and connecting the device
3.3 Connecting the device
SIMATIC IPC347G
38 Operating Instructions, 10/2020, A5E50059993-AA
3.3.5 Connecting device to networks
The following options are available for integrating the device in existing or planned system
environments and networks.
Ethernet
Wake on LAN and Remote Boot are supported.
You can use the integrated Ethernet interfaces (10/100/1000 Mbps) for communication and
data exchange with automation devices, such as SIMATIC S7.
You need the "SOFTNET S7" software package for this.
PROFINET
PROFINET can be operated via:
• Standard Ethernet interfaces (RT)
SIMATIC NET
Use this software package to create, operate and configure an innovative network for Field &
Control level. Additional information is available under SIMATIC NET
(https://new.siemens.com/global/en/products/automation/industrial-communication.html
).
The software package and the documentation are not included in the scope of delivery.
Additional information
You can find additional information on the Internet at:
Technical support (https://support.industry.siemens.com
)
3.3.6 Dual-monitoring
You can operate on up to two monitors with the VGA and DP cables.
The output on the extended monitor can be the same as the main monitor or the extension
desktop of the main monitor. You can configure it in windows screen and display setting.
To Next Page
Loading...
Need help?
General
