Siemens SIMATIC IPC347G User Manual

BIOS description
11.5 Boot menu
SIMATIC IPC347G
94 Operating Instructions, 10/2020, A5E50059993-AA
System
parameters
Function description Configuration op-
tions
Default setting
CPU
VCORE,+5V,
+12V,
+3.3VSB,
+5VSB, VBAT
The onboard hardware monitor automatically detects the volt-
age output through the onboard voltage regulators.
None
None
CPU Fan
Control
Control the CPU fan.
• [Auto Mode]: CPU Fan speed change based on CPU temper-
ature.
None
[Auto Mode]
CHA Fan1
Control
Control the chassis fan.
• [Auto Mode]: Chassis Fan speed change based on mother
board temperature.
• [Silent Mode]: Chassis Fan speed keep stable and no noise.
• [Disabled Mode]: Uses Maximum speed
• [Auto Mode]
• [Silent Mode]
• [Disabled Mode]
[Silent Mode]
CHA Fan2
Control
Control the chassis fan.
• [Auto Mode]: chassis Fan speed change based on mother
board temperature.
• [Silent Mode]: chassis Fan speed keep stable and no noise.
•
[Disabled Mode]: Uses Maximum speed
• [Auto Mode]
• [Silent Mode]
• [Disabled Mode]
[Silent Mode]
11.5 Boot menu
Boot menu
The Boot menu allows you to change the system boot options.
Boot Configuration
In the Boot Configuration page, you can modify the boot up screen between POST message
and SIEMENS logo.
System parameters
Function description
Configuration options
Default setting
Fast Boot
Change the boot speed.
• [Enabled]: Select to accelerate the boot
speed.
• [Disabled]: Select to go back to normal
boot.
• [Enabled]
• [Disabled]
[Disabled]
Quiet Boot
Enable or disable the Quiet Boot option.
• [Enabled]
•
[Disabled]
[Enabled]
HDD Boot
Enable or disable the HDD Boot option.
• [Enabled]
• [Disabled]
[Enabled]

Siemens SIMATIC IPC347G Specifications

General

Brand	Siemens
Model	SIMATIC IPC347G
Category	Industrial PC
Language	English