Siemens SIMATIC IPC347G User Manual

BIOS description
11.7 Save & Exit menu
SIMATIC IPC347G
Operating Instructions, 10/2020, A5E50059993-AA
99
Secure Boot
System parameters
Function description
Configuration options
Default setting
Secure Boot
Set the secure boot. Platform key (PK) is
enrolled and the system is in user mode. The
mode change requires platform reset.
• [Enabled]
•
[Disabled]
[Disabled]
Secure Boot Mode
Select the Boot Mode:
• [Standard]
• [Custom]: In this mode, Secure Boot
policy variables can be configured by a
physically present user without full au-
thentication.
• [Standard]
• [Custom]
[Custom]
Key
Man-
age-
ment
Install Default
Secure Boot Keys
Load the default secure boot keys.
None
None
PK Management
Enroll Factory Defaults or load certificates
from a file.
KEK Management
DB Management
DBX Management
11.7 Save & Exit menu
Save & Exit menu
The Save & Exit menu allows you to load the optimal default values for the BIOS items, and
save or discard your changes to the BIOS items.
System parameters
Function description
Save Changes and Reset
All changes are saved.
After the system is rebooted, the new system configurations take effect.
Discard Changes and Reset
Reboot the system without saving the changes.
Restore Defaults
Restore/load default values for all setup options.
Save as User Defaults
This option saves current configuration as User Defaults.
Restore User Defaults
This option restores User Defaults to all setup options.
Enter EZ-Flash mode
Press Enter to launch EZ-Flash mode.
Save Setup Profile to File Sys-
tem Drive
Press Enter to save setup profile to file system drive.
Load Setup Profile from File
System Drive
Press Enter to load setup profile from file system drive.

Siemens SIMATIC IPC347G Specifications

General

Brand	Siemens
Model	SIMATIC IPC347G
Category	Industrial PC
Language	English