Siemens SIMATIC IPC347G

Operating the device
5.2 Monitoring functions
SIMATIC IPC347G
Operating Instructions, 10/2020, A5E50059993-AA
43
5.2 Monitoring functions
You can monitor the following device functions:
Monitoring
Description
Status display and actions
Temperature
monitoring
Monitor the temperature
of CPU and motherboard.
• The onboard hardware monitor automatically detects and displays the
CPU temperatures.
• The onboard hardware monitor automatically detects and displays the air
inlet temperature.
• The onboard hardware monitor automatically detects and displays the air
outlet temperature.
Fan monitoring
Monitor the CPU FAN and
chassis Fan.
Check the function in the Hardware Monitor Menu (Page 93) of BIOS:
• CPU FAN control:
– [Auto Mode]: CPU Fan speed change based on CPU temperature.
• CHA Fan1 Control
– [Auto Mode]: Chassis Fan speed change based on mother board tem-
perature.
– [Silent Mode]: Chassis Fan speed keep stable and no noise.
– [Disabled Mode]: Uses Maximum speed
• CHA Fan2 Control
– [Auto Mode]: Chassis Fan speed change based on mother board tem-
perature.
– [Silent Mode]: Chassis Fan speed keep stable and no noise.
–
[Disabled Mode]: Uses Maximum speed