Expanding and assigning parameters to the device
6.3 Memory modules
SIMATIC IPC347G
Operating Instructions, 10/2020, A5E50059993-AA
49
6.3.2 Installing memory modules
Requirement
• You have noted the information on combination options and the conditions of use of
memory modules under "Usable memory modules (Page 48)".
• The device is open, see important information in "Open the device (Page 44)".
• If necessary, the expansion cards may be removed for easier access to the memory
modules, see "Changing the power supply (Page 60)".
To install the memory module
• Only install memory modules designed for the default motherboard.
• Recommend selecting
memory modules with the same brand, capacity, speed, and chips if you use
multiple Memory Modules.
• Unplug the power cord from the power outlet before installing Memory Module.
• A memory module can be installed only when the direction is correct. Switch the
direction if the memory cannot able to be inserted into the memory socket.
• DDR2 and DDR3 memory modules are not compatible. Please
make sure to install DDR4 Memory Module on this motherboard.
To Next Page
Loading...
Need help?
General
