Siemens SIMATIC S5 Equipment Manual

Technical Specifications
R 02/92
8.8
Permissible Slots for the Digital Position Decoder Module
Programmable Controller
Slot Designation
in Module
Subrack
m ~ 1P 241 can be o~erated in this slot.
Ps CPU
I
o
CR 700–OIJ L
Ps
CR 700–OLE
i
Central
device
CR 700–1 ‘
s
CPU o
I
1 2 3
4 5 6
IM
115U
Ps CPU
I
o
CR 700–2
CR 700–3 ‘
s
CPU
I
o
I
1
I
2
I
3
Expansion
t
Ps
I
o
ER 701 –3’
)
device
Central device 135U
Central device 155U
Expansion device 183U
Expansion device 184U
Expansion device 185U
3
I
19
131
Expansion device 186U
I
147 Im
and expansion devices ER 701 –1, ER 701–2 and S5–187U.
1)
2)
3)
4)
5)
Starting with release status 6ES5 701–3LA13, alarms can be processed in the expansion
device when light wave conductor couplings
6ES5 307–3UA11 and 6ES5 317–3UA11 are
used.
Functionality severely restricted since there are not interrupt lines.
Functionality restricted since not all interrupts lines are present.
Interrupt only with IM 307/317
Jumpers on the bus PCB must be changedd first.
8 – 12
1P 241 Equipment Manual
@SiemensA(31989, Order No.: 6ES5998-0KD21
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Siemens SIMATIC S5 Specifications

General

Product type designation	SIMATIC S5
Programming language	STEP 5
Digital inputs	Varies by model
Digital outputs	Varies by model
Analog inputs	Varies by model
Analog outputs	Varies by model
Supply voltage	24V DC
CPU Type	Varies by model
Memory	Varies by model
Digital I/O	Varies by model
Analog I/O	Varies by model
Communication	PROFIBUS
Operating Temperature	0°C to 60°C
Relative Humidity	5% to 95% (non-condensing)