Siemens SIMATIC S5 Equipment Manual

Contents
R 02/92
9.6
9.6.1
9.6.1.1
9.6.2
9.6.3
9.6.3.1
9.6.4
9.6.5
9 –
II
Direct Programming of the 1P 241 (without the Standard Function Block) ...9 – 63
Parameterization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 – 63
Byte Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. ......9 – 84
Modification of Parameterized Initial and End Values . . . . . . . . . . . . . . . . . . . . . 9 – 65
Reading the Result Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...9 – 66
InterruptProcessing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–67
Reading theAbsoluteValue (ActualValue) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–68
Special Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–70
IP241 Equipment Manual
@SiemensAG 1989, Order No:6ES5998-0KD21
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Siemens SIMATIC S5 Specifications

General

Product type designation	SIMATIC S5
Programming language	STEP 5
Digital inputs	Varies by model
Digital outputs	Varies by model
Analog inputs	Varies by model
Analog outputs	Varies by model
Supply voltage	24V DC
CPU Type	Varies by model
Memory	Varies by model
Digital I/O	Varies by model
Analog I/O	Varies by model
Communication	PROFIBUS
Operating Temperature	0°C to 60°C
Relative Humidity	5% to 95% (non-condensing)