R 02/92
Programming Instructions
Entry in Byte No:
(Module Address
+n)
n=()
n=l
n=4
Hex
BCD HEX
Inhibit interrupt depending on direction
Channel 1, backwards
inhbited
xl
Channel 1, forward inhibited
x2
Channel 1, both directions inhibited
x3
Channel 2, backwards
inhbited
lx
Channel 2, forward inhibited
2x
Channel 2, both directions inhibited
3x
Code
F8
Inhibit interrupts
Code
E3
Inhibit interrupts for supply
Code
E4
1P
241 Equipment Manual
@
Siemens AG 1989, Order No.: 6ES5
998-0KD21
9 – 71
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
