Siemens SIMATIC S5 Equipment Manual

R02J92
Table of Contents
Ill
$:7.
, i Texts in these boxes contain important information and instructions which must be fol-
~j lowed to ensure safe operation and protection of the module.
,,.,. .!
For clarity’s sake, this equipment manual does not cover every conceivable situation in complete
detail.
Contact your local
Siemens office if you need additional information or if a special problem arises
which is not covered in sufficient detail by this manual.
In addition, be aware that the contents of this equipment manual do not constitute a part of a pre-
vious or existing agreement, promise, or legal relationship and is not intended to alter same.
All obligations on the part of
Siemens are based on the respective purchase contract which also
contains the complete and sole valid warranty provisions. The 1P 241 Equipment Manual neither
widens nor restricts these contractual warranties.
1P 241 Equipment Manual
@ Siemens AG 1989, Order No.: 6ES5 998-0KD21
o – Ill
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Siemens SIMATIC S5 Specifications

General

Product type designation	SIMATIC S5
Programming language	STEP 5
Digital inputs	Varies by model
Digital outputs	Varies by model
Analog inputs	Varies by model
Analog outputs	Varies by model
Supply voltage	24V DC
CPU Type	Varies by model
Memory	Varies by model
Digital I/O	Varies by model
Analog I/O	Varies by model
Communication	PROFIBUS
Operating Temperature	0°C to 60°C
Relative Humidity	5% to 95% (non-condensing)