Siemens SIMEAS R User Manual

12
12.1 General
135Digital Fault Recorder, SIMEAS R-PMU, Manual
E50417-H1076-C360-A5, Release 10.2012
Load parameters from the device
Figure 12-5 Load parameters from the device
You can transfer the complete parameter settings from the SIMEAS R-PMU with the menu
command Parameter → Load from device to OSCOP P. The parameters can be edited after
the transfer in OSCOP P. This function requires an existing data connection to the device.
Transfer parameters to the device
You can transfer the existing parameters from OSCOP P to the SIMEAS R-PMU with the menu
command Parameter
→ Send to device. An existing data connection to the device is required
for the transfer of the parameter data.
Device status
You can get information on the SIMEAS R-PMU status with the menu command Parameter
→
Read status from device... and check settings, analyse faults, etc. (if necessary).

Siemens SIMEAS R Specifications

General

Brand	Siemens
Model	SIMEAS R
Category	Measuring Instruments
Language	English