Siemens SIMOCODE pro User Manual

Parameter
A.6 Block parameter MMLog
SIMOCODE pro PCS 7 Library V9.0
270 Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Parameter
Data format
Default setting
Meaning
Feature STRUCT
• Bit 0: BOOL
• ...
• Bit 31:
BOOL
–
• 0
• 0
• 0
Status of various features
ReserveIn WORD 16#00 Reserved
Output parameters
Table A- 20 Output parameter MMLog
Parameter
Data format
Default setting
Meaning
RackF_Act STRUCT
• Value:
BOOL
• ST: BYTE
–
• 0
• 16#80
1 = Rack Failure
ModF_Act STRUCT
• Value:
BOOL
• ST: BYTE
–
• 0
• 16#80
1 = Module Failure
RdErr STRUCT
• Value:
BOOL
• ST: BYTE
–
• 0
• 16#80
1 = Error read record
RdErrStat
WORD
16#00
Status of read record error
StaTmst
BYTE
0
Status of time stamp functionality
TmstmpAct STRUCT
• Value:
BOOL
• ST: BYTE
–
• 0
• 16#80
1 = Time stamp functionality active
Sync_Ok
BOOL
FALSE
1 = Synchronization ok
OflwBuf
BOOL
FALSE
1 = Buffer overflow
RdAct
BOOL
TRUE
1 = Enable read/write record
LocalAct STRUCT
• Value:
BOOL
• ST: BYTE
–
• 1
• 16#80
1 = Motor in Local Operation Mode: Local Mode Indicator
OnAct STRUCT
• Value:
BOOL
• ST: BYTE
–
• 1
• 16#80
On Mode is active

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000