A
A.1 Parameter list
A-849
Siemens AG 2005 All Rights Reserved
SIMODRIVE 611 universal Description of Functions (FBU) – 04.05 Edition
1740 Significance, abs. speed act. value repres. (fine) (ARM SRM)
Significance, abs.velocity act.value representation(fine) (SLM)
Min Standard Max Unit Data type Effective
– – – m/min Floating Point RO (SLM)
– – – rpm Floating Point RO (SRM ARM)
Note: Internal Siemens
1741 Significance, utilization representation (fine)
Min Standard Max Unit Data type Effective
– – – % Floating Point RO (SLM)
– – – % Floating Point RO (SRM ARM)
Note: Internal Siemens
1742 Significance, torque setpoint representation (fine) (ARM SRM)
Significance, force setpoint representation (fine) (SLM)
Min Standard Max Unit Data type Effective
–––µN Floating Point RO (SLM)
–––µNm Floating Point RO (SRM ARM)
Note: Internal Siemens
1743 Significance, velocity representation
Min Standard Max Unit Data type Effective
– – – c*MSR/min Floating Point RO (SLM)
– – – c*MSR/min Floating Point RO (SRM ARM)
Note: Internal Siemens
1744 Weighting, velocity representation, external
Min Standard Max Unit Data type Effective
– – – c*MSR/min Floating Point RO (SLM)
– – – c*MSR/min Floating Point RO (SRM ARM)
Note: Internal Siemens
1745 Weighting following error representation DSC
Min Standard Max Unit Data type Effective
– – – mm Floating Point RO (SLM)
– – – Degree Floating Point RO (SRM ARM)
Note: Internal Siemens
1781:17 Setpoint source, process data PROFIBUS (–> 4.1)
Min Standard Max Unit Data type Effective
– – – Hex Unsigned16 RO
... indicates the source of the process data received via PROFIBUS.
The high byte includes a reference to the source device (0xFF for the master, DP address for a
Publisher) and the low byte, the offset within the telegram
(Counting in bytes, starting with 1).
The following is valid:
P1781:0 Number of valid entries
P1781:1 Source of process data 1 (STW1)
P1781:2 Source of process data 2 (PZD2), etc.
Note: refer to the index entry ”Process data”
04.05
To Next Page
Loading...
