Applications
12.6 Application examples with DMC20
Drive functions
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
929
Instructions for offline commissioning with STARTER
With automatic online configuration in STARTER, the DMC20 is detected and integrated in
the topology. The following steps must be taken to commission offline:
1. Configure the offline drive device.
2. Right-click "Topology" in the project navigator and call the "Add new object > DRIVE-
CLiQ hub" context menu.
3. Configure the topology.
Overview of important parameters (see SINAMICS S120/S150 List Manual)
p0105
Activate/deactivate drive object
r0106
ct active/inactive
p0151[0...1]
-CLiQ Hub Module component number
p0154
-CLiQ Hub Module detection via LED
r0157
-CLiQ Hub Module EEPROM data version
r0158
-CLiQ Hub Module firmware version
r0896.0
BO: Parking axis status word
p0897
BI: Parking axis selection
To Next Page
Loading...
