Tables
16.1 Instructions
Job planning
722 Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
Operation Meaning W
1)
Description see
2)
DELDL Delete additive offsets
PGAsl
Delete additive offsets (DELDL) (Page 395)
DELDTG Deletion of distance-to-go
PGAsl
Delete distance-to-go (DELDTG) (Page 579)
DELETE Delete the specified file. The file name
can be specified with path and file
identifier.
PGAsl
Delete file (DELETE) (Page 136)
DELTOOLENV Delete data records describing tool
environments
FB1(W1)
DIACYCOFA Axis-specific modal diameter
programming: OFF in cycles
m
FB1(P1)
DIAM90 Diameter programming for G90, radius
programming for G91
m
PGAsl
DIAM90A Axis-specific modal diameter
programming for G90 and AC, radius
programming for G91 and IC
m
PGsl
DIAMCHAN Transfer of all axes from MD axis
functions to diameter programming
channel status
PGsl
DIAMCHANA Transfer of the diameter programming
channel status
PGsl
DIAMCYCOF Channel-specific diameter programming:
OFF in cycles
m
FB1(P1)
DIAMOF
3)
Diameter programming: OFF
Normal position, see machine
manufacturer
m
PGsl
DIAMOFA Axis-specific modal diameter
programming: OFF
Normal position, see machine
manufacturer
m
PGsl
DIAMON Diameter programming: ON m
PGsl
DIAMONA Axis-specific modal diameter
programming: ON
Activation, see machine manufacturer
m
PGsl
DIC Relative non-modal axis-specific
diameter programming
s
PGsl
DILF Retraction path (length) m
PGsl
DISABLE Interrupt OFF
PGAsl
Deactivating/reactivating the assignment of an
interrupt routine (DISABLE, ENABLE) (Page
116)
DISC Transition circle overshoot tool radius
compensation
m
PGsl
DISCL Clearance between the end point of the
fast infeed motion and the machining
plane
PGsl
To Next Page
Loading...
