Siemens SINUMERIK 828D Programming Manual

Tables
16.1 Instructions
Job planning
Programming Manual, 07/2010, 6FC5398-2BP40-0BA0
757
Operation Meaning W
1)
Description see
2)
WHEN The action is executed cyclically when
the condition is fulfilled.
PGAsl
Cyclically checking the condition (WHEN, WHENEVER,
FROM, EVERY) (Page 553)
WHENEVER The action is executed once whenever
the condition is fulfilled.
PGAsl
Cyclically checking the condition (WHEN, WHENEVER,
FROM, EVERY) (Page 553)
WHILE Start of WHILE program loop PGAsl
Program loop with condition at start of loop (WHILE,
ENDWHILE) (Page 103)
WRITE Write text to file system
Appends a block to the end of the
specified file.
PGAsl
Write file (WRITE) (Page 133)
WRTPR Delays the machining job without
interrupting continuous-path mode
PGAsl
X Axis name m/s PGsl
XOR Logic exclusive OR PGAsl
Comparison and logic operations (Page 66)
Y Axis name m/s PGsl
Z Axis name m/s PGsl

Siemens SINUMERIK 828D Specifications

General

Control Type	CNC
Operating System	Windows Embedded
Processor	Intel Atom
Display	10.4" color TFT display
Interfaces	Ethernet, USB
Programming	ShopMill, ShopTurn
Operation Panel Size	10.4"
Protection Class	IP65
PLC Memory	2 MB
Spindle Capacity	4 spindles
Hard Drive	CompactFlash