2 Technical Description
2.1 Safety notes and scope of delivery
Manual
SIPART DR21
C73000-B7476-C143-08
17
2 Technical Description
2.1 Safety notes and scope of delivery
!
W ARNING
When operating electrical equipment, certain parts of this equipment automati-
cally carry dangerous voltages. Failure to observe these instructions could
therefore lead to serious injury or material damage. Only properly trained and
qualified personnel are allowed to work on this equipment. This personnel must
be fully conversant with all the warnings and commissioning measures as de-
scribed in this user’s guide.
The perfect and safe operation of this equipment is conditional upon proper
transport, proper storage, installation and assembly as well as on careful oper-
ation and commissioning.
D Scope of delivery
When the controller is delivered the box also contains:
1 Controller as ordered
1 three-pin plug at 115/230 V AC or special plug at 24 V UC
2 Clamps, pluggable
2 Adhesive labels ”Power supply 115 V” (for 115/230 V-version).
1 CD ROM with documentation
D Standard controllers
The following variants of the SIPART DR21 are available:
Order number:
Output stage Power Supply
6DR2100-4 K/S-output 24 V UC
6DR2100-5 K/S-output 115/230 V AC, switchable
D Options modules (signal converters)
Signal converters have separate ordering- and delivery items.
For handling reasons standard controllers and signal converters which were ordered at the
same time may be delivered by separate mail.
D Documentation
This user’s guide is available in the following languages:
English C73000-B7476-C143
German C73000-B7400-C143
To Next Page
Loading...
Need help?
General
