Device Functions
SIRIUS 3RW44 manual
6-18 GWA 4NEB 535 2195-02 DS 06
6.5 Current Limit Values for Load Monitoring
It is possible to set minimum and maximum current limit values; if these are
exceeded or undershot, a message can be output.
Minimum current
limit value
The minimum current limit value can, for example, be used to indicate a V-belt
break and the corresponding no-load current of the motor, or when the fan filter
is clogged.
Maximum current
limit value
The maximum current limit value can be used to determine increased power loss
in the application, e.g. caused by storage damage.
To Next Page
Loading...
