Siemens SIRIUS 3RW44 - Commissioning; 5.1 Menu Structure, Navigation, Changing Parameters; 5.2 Switching on for the First Time; 5.3 User-specific Commissioning

SIRIUS 3RW44 manual
GWA 4NEB 535 2195-02 DS 06
5-1
Commissioning
5
Chapter Subject Page
5.1 Menu Structure, Navigation, Changing Parameters 5-2
5.1.1 Menu Structure and Navigation 5-2
5.1.2 Changing Parameters: For Example Motor Data 5-3
5.2 Switching on for the First Time 5-4
5.2.1 Recommendation on Procedure for 3RW44 Commissioning 5-4
5.2.2 Quick Start Menu 5-6
5.3 User-specific Commissioning 5-8
5.3.1 Main Menu Item "Settings" 5-9
5.4 Making Settings in the Selected Parameter Set 5-10
5.4.1 Selecting the Parameter Set 5-10
5.4.2 Entering the Motor Data 5-11
5.4.3 Specifying the Starting Mode 5-13
5.4.4 Specifying the Stopping Mode 5-20
5.4.5 Setting Slow Speed Parameters 5-26
5.4.6 Specifying Current Limit Values 5-27
5.4.7 Parameterizing the Inputs 5-28
5.4.8 Parameterizing the Outputs 5-29
5.4.9 Selecting Motor Protection Settings 5-31
5.4.10 Selecting Display Settings 5-33
5.4.11 Specifying the Behavior of the Protective Functions 5-34
5.4.12 Specifying the Names on the Device Display 5-35
5.4.13 Activating the Field Bus Interface (PROFIBUS DP) 5-36
5.4.14 Saving Options 5-37
5.5 Other Device Functions 5-41
5.5.1 Display measured value 5-41
5.5.2 Status Display 5-42
5.5.3 Motor Control (Assigning Control Priority) 5-43
5.5.4 Statistics 5-44
5.5.5 Safety (Specifying the User Level, Parameterization Protection) 5-48