Configuration Instructions
SIRIUS 3RW44 manual
GWA 4NEB 535 2195-02 DS 06
2-7
2.5 Basic Factory Settings
Apply the basic factory settings (default settings)
• in the event of faulty parameterization
• if SIRIUS 3RW44 soft starters that have already been parameterized are to be
further used in other systems.
Note
If this is not done, the present parameterization might cause drives to start
running.
Soft starters already parameterized by the operator can be set back to the basic
factory settings without requiring additional auxiliary tools.
To reset to the basic factory settings, refer to "Restoring the factory settings" on
Page 5-40.
To Next Page
Loading...
