ESC
No. of starts
OK
motor right
0
ESC
No. of starts
OK
motor left
0
ESC
Number of
OK
overload trips
0 %
ESC OK
No. of stops
with el. brake
0
ESC OK
ESC OK
ESC
No. of starts
OK
Output 3
ESC
No. of starts
OK
Output 4
No. of starts
Output 1
No. of starts
Output 2
Note
The operating hours counter is activated as soon as control voltage is applied. Maximum
value displayed: 99999:59:59 hours
Note
Number of starts motor left, only possible in combination with
slow speed.
Note
Number of stops with el. brake: The value is increased by one
when braking has been chosen as the stopping mode.
Note
The value is increase by one when the output is activated.
7
8
9
10
0
11
0
12
0
13
0
14
ESC
Motor current
1
OK
ESC
2
OK
ESC
Last trigger
OK
ESC
Maximum
2
OK
OK
current IA (%)
ESC
Last trigger
OK
current IA (rms)
0 A
ESC OK
ESC
Statistics
3
data
Imax (%)
0 %
Motor current
Imax (rms)
0 A
0 %
Operating hours
device
0 : 28 : 02
3
4
5
ESC
Settings
3
Display mea-
select
SIEMENS
Menu
3RW44
1
sured value
ESC
ESC OK
OK
select
Status
select
2
display
ESC OK
ESC
Motor
4
control
ESC
Statistics
5
OK
OK
OK
OK
OK
Notice
The "Statistics" menu item is available for devices with firmware product version
*E04* or higher. The firmware product version is listed on the front of the device
below the petrol-colored labeling field. The "Log lists" sub-item can only be used in
combination with "Soft Starter ES" parameterizing and diagnostics software.
Standard
ESC OK
Operating hours
Motor
0 : 28 : 02
6
OK
ESC
Log lists
1
select
select
select
select
select
select
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
pointer
To Next Page
Loading...
