Siemens SITRANS FUS380 - Page 100

Parameter Default val‐
ue
Value range Access
level
Description
601 Day of week, if weekly log Sunday Monday to Sun‐
day
R/W When log interval is set to weekly logging,
this parameter defines what weekday the
logging is performed.
Valid if weekly log interval is activated
602 Limit for too high consumption 1E+09 -3.4E+38 to
+3.4E+38
R/W Limit for too high consumption during cur‐
rent log interval. Based on totalizer 1 and
the selected unit
603 Limit for too low consumption -1E+09 -3.4E+38 to
+3.4E+38
R/W Limit for too low consumption during cur‐
rent log interval. Based on totalizer 1 and
the selected unit
604 Reset log No No, Yes HW key Reset data logger
610 Date of latest log period 1/1/2000
12:00:00
AM
Read
611 Latest Log period totalized (1) 0.000000 Read
612 Latest Log period totalized (2) 0.000000 Read
613 Latest Log period fault status no faults Read
614 Latest Log period status infor‐
mation
no flags Read
… … … … … …
735 Date of log period 26 1/1/2000
12:00:00
AM
Read
736 Log period 26 totalized (1) 0.000000 Read
737 Log period 26 totalized (2) 0.000000 Read
738 Log period 26 fault status no faults Read
739 Log period 26 status informa‐
tion
no flags Read
Periodic log Totalizer 1
160 Next setting date 01-01-2000 dd-mm-yyyy R/W Next setting date where actual value of
totalizer 1 is stored
161 Latest setting date 01-01-2000 dd-mm-yyyy Read Latest setting date where value of totaliz‐
er 1 was stored
162 Latest totalizer 1 value 0 Read Latest stored value of totalizer 1
163 Previous setting date 01-01-2000 dd-mm-yyyy Read Previous setting date where value of to‐
talizer 1 was stored
164 Previous totalizer 1 value 0 dd-mm-yyyy Read Previously stored value of totalizer 1
Option module
900 Selection of option module None None, Current
output
R/W Selction of output module type
905 SW version Read SW version of the module
906 Enable Yes No, Yes R/W Turn on/off current output
907 Scaling Qp Cut-off to Qmax R/W Scaling flow to 20 mA
908 Direction Positive Positive, Nega‐
tive, Bidirection‐
al
R/W Selection of flow direction for 4-20mA
Parameter lists
A.2 Output
SITRANS FUS380/FUE380
100 Operating Instructions, 05/2018, A5E00730100-AE