SDS1000CML+/SDS1000DL+ Quick Start III
Do not Operate with Suspected Failures
If you suspect that there is a damage of the instrument, please let a
qualified service personnel check it.
Avoid Circuit or Components Exposed
Do not touch exposed contacts or components when the power is
on.
Do not Operate in Wet/Damp Conditions
Do not Operate in an Explosive Atmosphere
Keep the Surface of the Instrument Clean and Dry
Safety Terms and Symbols
Terms on the product. These terms may appear on the product:
DANGER: Indicates direct injuries or hazards that may happen.
WARNING: Indicates potential injuries or hazards that may happen.
CAUTION: Indicates potential damages to the instrument or other
property that may happen.
Symbols on the product. These symbols may appear on the
product:
Hazardous Protective Warning Earth Ground Power
Voltage Earth Ground Switch
To Next Page
Loading...
