SDS1000CML+/SDS1000DL+ Quick Start 25
7. USB storage can’t be recognized:
(1) Check if the U disk can work normally.
(2) Make sure that the U disk being used is of flash type, the
instrument does not support USB of hardware type.
(3) Make sure that the capacity of the U disk is not too large. It is
suggested that the capacity is no larger than 4 G.
(4) Restart the instrument and then insert the U disk to check.
(5) If it is still in abnormal use, please contact SIGLENT.
Contact SIGLENT
SIGLENT TECHNOLOGIES CO., LTD
Address：3/F, building NO.4, Antongda Industrial Zone, 3rd Liuxian
Road, Bao’an District, Shenzhen, P.R.China
Tel：0086-755-3661 5186
E-mail：sales@siglent.com
http://www.siglent.com
To Previous Page
Loading...
