SIGLENT
18 SDS1000CML+/SDS1000DL+ Quick Start
DEFAULT SETUP
: Press the button to restore the oscilloscope to its
default settings. The default voltage scale and time base are
respectively 1v/div and 500us.
HELP Information
: Press the button to enable HELP function, and then press
down any menu to display corresponding help information. To
display the submenus help information of the current menu, firstly
you should open the current menu, and then press down the
“HELP” button, the last step is to select any submenu you want.
PRINT
: Press the button to enable print function. If the instrument
is connected to a printer which is usable, press it to perform print
function.
Default
To Next Page
Loading...
