Silca Idea - Keyboard Inversion; Language; Preferences

Copyright Silca 2004 107
Operating Manual - English IDEA
6.2.4 Preferences
1 - used to choose the measuring unit used to view
dimensions such as parameters, adjustments etc.
(1 = INCH or 0 = millimetres).
2 - used to select from the main menu the function you
wish to appear on the screen when the machine is turned
on.
Place the cursor on the item to be selected and press
[ENTER]. An asterisk will appear (*) to highlight the
selection made.
3 - searches by code must be filtered by selecting the
makes in which you are interested. This reduces the
number of SSNs involved in the search.
Place the cursor on the item to be selected and press
[ENTER]. An asterisk will appear (*) to highlight the
selection made.
Press “CLEAR/COPY” to null the selection.
[63] total number of makes
The STANDARD setting of the machine enables searches
through all makes (select the item “0-All makes”); as soon
as one of the makes is selected the asterisk disappears
from the item “0- All makes” and ONLY the MAKES
selected are involved.
4 - if enabled (=1) is used to skip some steps (or windows),
when applicable in heavy operating flows, in order to
speed up the procedure required by the operator.
6.2.5 Language
Enter the number that corresponds to the language you intend to work with.
Lang. select. = 2
1: Italiano 2: English
3: Deutsch 4: Français
5: Español
6.2.6 Keyboard inversion
This operation is used to invert the function of the
alphanumeric keys.
With Keypad inversion disabled (0):
• to digit number
1 : press [1/H] key.
• to digit letter
H : press SHIFT + [1/H] key.
With Keypad inversion enabled (1):
• to digit number
1 : press SHIFT + [1/H] key.
• to digit letter
H : press [1/H] key.
NOTE: this function is operative with “Insert the Cuts”, “Decode and Copy” and in from the main
menu.
1-Measurement unit
2-Start menu
3-Preferred MFG
4-Quick menu
Measurement unit=
( 0 =Millimetres )
( 1 = Inch )
0 Copy from original
1 Decode and Copy
2 Insert the Cuts
3 Queue from PC
Select MFG [63]
0* All MFG
1* AGA
2* AGB
Quick menu = 0 (0-1)
Inversion keyboard
function = 0
( 1 = Enabled )
See operating manual.