Silca Idea - Machine Installation and Preparation; Damage Check and Environmental Conditions; Positioning and Workstation Setup

Copyright Silca 2004 9
Operating Manual - English IDEA
1.4 T ECHNICAL DATA
Electricity supply:
230V-50Hz
Maximum absorbed power:
230V: 2 Amp. 250 Watt
Cutter motor:
single phase and speed
Cutter:
hard metal carbide Ø 100 mm x 1,25 mm
Tool speed:
50Hz: 1150 rpm (+/- 10%)
Movement:
on 2 axes with ball screws activated by step motors, on rectified roller guides.
Possibility to add a 3rd axis to activate the optional tilting and rotating clamps.
Clamp:
revolving
Runs:
X axis: 37 mm Y axis: 32 mm
Dimensions and types of keys:
The machine is designed for cutting keys with the minimum/maximum dimensions described on page 2,
page 3 and page 4.
Dimensions:
width: 500 mm depth: 500 mm height: 420 mm (with raised shield 650 mm)
Mass:
45 kg
Noise level:
sound pressure Lp(A) = 81,5 dB(A) - steel keys / 75,5 dB(A) - brass keys