Copyright Silca 2004 35
Operating Manual - English IDEA
5.10 MUEL PUMP KEYS
Fig. 43
THE SET COMPRISES:
E4
Adapter for Muel pump keys (E4 - ID), used for cutting (install between the rotating S1 and K1 tailstock).
E8
Adapter for Muel pump keys (E8 - ID), used for reading (install in the place of the S100 - B mobile clamp).
Note: operations allowed only when decoding using SN 328 / SN 329 / SN 352
When the machine requires (indicates on display) adapter
E4
or
E8
, proceed as in the example
.
- Choose
option 1
- “Decode and Copy”
- Choose the SN required (SN328 / SN329 / SN352...) and proceed.
To read Muel keys, proceed as follow
:
READING MUEL PUMP KEYS
0 - Copy from original
1 - Decode and Copy
2 - Insert the cuts
3 - Queue from PC
DECODE SSN 328
Original on right
Clamp: S100 Stop: 4
Adapt:
E8
[START]
D726465ZB
Adapters
OPTIONAL
To Next Page
Loading...
