Silca Idea - Reference Guide

Copyright Silca 2004 1
Operating Manual - English IDEA
REFERENCE GUIDE
This manual has been produced to serve as a guide for users of the IDEA key-cutting machine: Read it
carefully; it is essential if you wish to operate your machine safely and efficiently.
CONSULTATION
The contents of the manual are divided into sections relating to:
• Machine description ........................................................................................... Chapter 1
• Transport and installation ................................................................................... Chapters 2-3
• Regulation and use ............................................................................................ Chapters 4-5-6
• Maintenance ....................................................................................................... Chapters 7-8-9
TECHNICAL TERMS
Common technical terms are used in this manual.
To assist those with little experience of keys and key-cutting, below is an illustration of the terms most
frequently used
.
1) Head
2) Stem
3) Bit
Fig. 1
head
stem
bit
*
WITH OPTIONAL ADAPTERS
***
**
**
*
*
* *
*