Silca Idea - French Rear Stop Keys

Copyright Silca 2004 51
Operating Manual - English IDEA
5.12.1 FRENCH REAR STOP KEYS
For this type of keys see the information in Chapter 5.12 "KEYS WITH REAR STOP (Male keys and
Female keys)", page 43.
TYPES OF KEYS: see page 47.
OPERATION FLOW
Choose option 0 - Copy from Original
Choose option 8 - Rear Stop french
Choose option 1 – Reading + Cutting
NOTE: Jaws F or G could also be used (see JAWS A-E / A-F / A-G on page 46. The rear stop is not
necessarily up against the side of the jaw (fig. 68).
Fig. 68
0 - Copy from Original
1 - Decode and Copy
2 - Insert cuts
3 - Queue from PC >>
SELECT TYPE OF KEY
0 - Bit stop male
1 - Bit stop female
2 - Shoulder stop
3 - Pump
4 - Square-square tip
5 - Square-round tip
6 - Square stepped tip
7 - Rear stop
8 - Rear stop french
9 - Small bit
10 - Special bit female
1 - Reading + Cutting
2 - Cutting only
3 - Reading only
4 - Post-Reading adj.
KEY READING
Original on right
Clamp.: S100 A-E Stop: 0
Adapt.: E11 [START]