Silca Idea - Pump Keys

32 Copyright Silca 2004
IDEA Operating Manual - English
5.9 PUMP KEYS
Fig. 37
E3
Adapter for pump keys (E3 - ID), used for cutting (install between the rotating S1 and K1 tailstock).
E7
Adapter for pump keys (E7 - ID), used for reading (install in the place of the S100 - B mobile clamp).
When the machine requires (indicates on display) adapter
E3 or E7 , proceed in the way described in the
following examples:
- It is very important to distinguish the type of key to be copied. Choose option 3 - Pump.
- Choose
option 1 - Reading + Copy
READING PUMP KEYS
SELECT TYPE OF KEY
0 - Bit stop male
1 - Bit stop female
2 - Shoulder stop
3 - Pump
1 - Reading + Copying
2 - Cutting only
3 - Reading only
4 - Post-reading adj.
KEY READING
Original on right
Clamp: S100 A Stop: 0
Adapt: E7 [START]
D726180ZB
Adapters
OPTIONAL