Silca Idea - Ist of Enabled Systems Activated and Removal of an Activation; Limited Access to Data (Protected Systems)

108 Copyright Silca 2004
IDEA Operating Manual - English
6.2.7 Limited access to Data (Protected Systems)
Silca has predisposed limited access to some of the data in the Database, in compliance with agreements
with some makers. Limitations apply to:
- SERIES: No access to codes or data cards [SR]
- TABLE: No access to codes [TB]
- DATA CARD: No access to data card [SC]
Gain access to protected data in the following way:
- request the maker’s authorization.
- communicate to Silca:
- The key-cutting machine SERIAL NUMBER
-The ACTIVATION CODE
- Key-cutting machine ID
Silca will issue a Password to enter in order to enable key-cutting of the protected system.
Example: Silca provides a protected data card for SSN No. yyy.
When SSN yyy is selected from menu 0-1 or 2 the
following appears on the screen:
When authorization has been received from the maker, apply to Silca for a password, providing the following
information:
- Key-cutting machine serial No. 1170145634567
Read the serial number on the ID plate fixed to the back of the machine.
- Machine ID 12345
Visible in the password application box or by selecting menus 6-7-1 on the machine.
- ACTIVATION Code SPWSC00011
Shown ONLY when access to protected data is attempted.
Once obtained, enter the password on the Password line,
as shown in the example given above.
If the correct password has been entered, the screen
shows:
The password can
be saved so that it need not be entered whenever the protected data card is used, or not
saved
so that access is limited only to the person in possession of the password.
6.2.7.1 L IST OF ENABLED SYSTEMS ACTIVATED AND REMOVAL OF AN ACTIVATION
To consult the list of enabled DATA (data card, series or table) select menus 6-7:
Select the item in menu 1 to see the Machine Identification
Number.
Select the item in menu 2 to see the list of Enabled
Systems
Use the (Right-hand arrow) key to view the description associated to the lock system.
To delete an enabled system, place the cursor on the line to be eliminated and press the CLEAR key.
PROTECTED DATA CARD
Machine ID:12345
Code:SPWSC00011
Password:0
CORRECT PASSWORD
Save
Password ?
No=STOP Yes=ENTER
PROTECTED SYSTEMS
1 Machine ID
2 Enabled Systems
Enabled Systems
1: SSN121 [SC]
2: SSN234 [SC]