Copyright Silca 2004 71
Operating Manual - English IDEA
Press ENTER:
K
EY
DECODING
BY
PC
With the use of a PC, i. and. with a much more complete collection of data, keys can be decoded as well as
cut. (Important: pay attention to the note for fitting the key).
SSN. 10
After launching the Silca Keys Program the decoding
function for SSN 10, appears on the machine display for a
few seconds:
then:
Press START:
The data relating to key depth are transmitted to the PC for
processing only at the end of the decoding cycle.
Bit 1: 2
121 21212 121
Possible depths:
123456# [1]
Bit 2: 2
212 21212 212
Possible depths:
123456# [1]
SSN: 10 M1 Brass
Clamp: S1 - K1 Stop: 0
Cutter: 1.25
Pcs = 1/ 1 [START]
Waiting for
computer data
DECODE SSN 10
Original on right
Clamp:S100 A-B Dist.: 0
[START]
Decoding in progress
Bit 1
Decoding in progress
Bit 2
Decoding OK
See computer!
To Next Page
Loading...
