Argus Radar - Installation and service manual
988-10187-004 4.4
Plots
This control will show the plot symbols.
Video Bank Selection
By this function, the user can select five types of video visualization:
• Scan Combined = Shows the combination of all the video banks.
• Scan A Bank = Shows radar video of bank A.
• Scan B Bank = Shows radar video of bank B.
• Scan RT Bank = Shows radar video of the Relative Trails bank.
• Scan TT Bank = Shows radar video of the True Trails bank.
Special Features
By pressing the relevant button, the system will ask for a password. There are
several special features in the system, and each one has a different password.
Enter the password “nmea” using the alphanumerical keypad to access the
Debug Display.
Video Oscilloscope
This button opens a menu where it is possible to see the video input of the
Antares p.c.b., this facility is meant to see the video amplitude.
The video will be sampled at the EBL position for each scan and the VRM mark
will be displayed as a range reference.
The oscilloscope can be configured in Spread mode, where the video is
sampled equally spaced sixteen times a scan.
On the right list, it is possible to select between different modes of presentation:
1. Video Integrated in different scans
2. Maximum of different scans
3. Maximum and Minimum of different scan
To Next Page
Loading...
