Argus Radar - SERIAL INTERFACE SPECIFICATIONS
988-10187-004 2.15
The first character indicates the use of GPS satellites, the second character indicates the
use of GLONASS satellites. If another satellite system is added to the standard, the mode
indicator will be extended to three characters; new satellite systems shall always be added to
the right, so the order of characters in the mode indicator is: GPS, GLONASS, other satellite
systems.
The characters should take one of the following values:
N = No fix. Satellite system not used in position fix, or fix not valid.
A = Autonomous. Satellite system used in non-differential mode in position fix.
D = Differential. Satellite system used in differential mode in position fix.
P = Precise. Satellite system used in precision mode. Precision mode is defined as: no
deliberate degradation (such as selective availability), and higher resolution code (P-code) is
used to compute position fix.
R = Real time kinematic. Satellite system used in RTK mode with fixed integers.
F = Float RTK. Satellite system used in real time kinematic mode with floating solution.
E = Estimated (dead reckoning) mode.
M = Manual input mode.
S = Simulator mode.
The mode indicator should not be a null field.
To Next Page
Loading...
