Backup and restore of system data
The system includes a backup and restore function, making it possible to back-up and
restore local system data.
Ú
Note: This is not a backup of the full system image, merely the configuration and
settings. For route back-up, each route has to be exported to external storage or another
ECDIS.
It is recommended to have backup routines that are carried out regularly.
Ú
Note: It is strongly recommended to make a complete system backup when the system
is installed and configured.
Backup and restore are initiated from the System Backup and restore user settings dialog.
Select Backup to external media to save your system data to an external memory device
located in the USB reader or in the SD-card reader on the E5000 unit.
Select Restore from external media to restore files from an external memory device.
Select Restore from internal storage to restore to factory settings.
Ú
Note: For back-up and synchronization between multiple ECDIS systems, refer to "PLECDIS
systems" on page 62.
Software upgrades
Software version, the SDK version and the Presentation library version are listed in the System
Information dialog.
The latest software is available for download from our website, www.navico.com/
commercial.
66
Maintenance| E50xx ECDIS Operator Manual
To Next Page
Loading...
Need help?
General
