Installing charts from other suppliers
The chart suppliers have different procedures for submitting Chart permit codes and charts.
For chart suppliers other than NAVTOR it is required to install Chart permits before charts can
be copied to the system. Refer to the supplier documentation for details.
Ú
Note: A DVD drive is NOT included in the system type approval.
Ú
Note: Charts from vendors that use CD/DVD for distribution have to be copied to a USB
memory stick. The whole content of the CD/DVD has to be copied to the USB memory
stick before applying it to the E5000.
Chart permits are copied to the system by using the Install permits menu option.
When Chart permits are installed, the charts have to be copied from an USB or SD drive to
the system by using the Find and install charts menu option.
Installing charts | E50xx ECDIS Operator Manual
23
To Next Page
Loading...
